Skip to main content
Structure1
Concrete driveway in Dallas, Texas

Services

Driveways & Walkways in Dallas–Fort Worth

New driveways, walkways, and replacements poured thick enough and reinforced correctly for North Texas soil.

Stamped concrete driveway with decorative border in Dallas, Texas
Herringbone brick-pattern stamped concrete
Freshly poured and finished concrete patio slab behind a brick home in Dallas-Fort Worth

Overview

Driveways & Walkways built for North Texas

Driveways take vehicle loads on soil that moves with every wet-dry cycle, so we pour them 5-6 inches thick with steel rebar over compacted base and cut control joints on a correct grid. Walkways and front entries get the same base preparation at patio thickness.

Tear-out and replacement is a large share of our concrete work in Dallas-Fort Worth: we demo the old slab, haul it off, re-compact the base, and pour new. Our Dallas driveway is a full stone-pattern stamp with a contrasting stamped border.

Options

Types and options

  • Broom-finish driveway

    The standard: clean, textured, slip-resistant.

    $7 – $11 / sq ft

  • Stamped border or full stamp

    A decorative band or a full stone or brick pattern.

    $12 – $22 / sq ft

  • Walkways and entries

    Front walks, side paths, and porch extensions matched to the house.

  • Driveway replacement

    Demo, haul-off, re-compacted base, new reinforced slab.

Why build it

Why homeowners choose it

  • Stops the heaving

    Correct thickness, rebar, and joints keep slabs from cracking across the surface.

  • Curb appeal

    A clean new drive or a stamped border changes the front of the house.

  • Warranty-backed

    2-year workmanship warranty on every pour.

Construction

How we build it

  1. 01Demo and haul-off of the old slab where replacing.
  2. 02Compacted base, forms set to drain, rebar on chairs.
  3. 035-6 inch pour for driveways, 4-inch for walkways; broom or stamped finish.
  4. 04Control joints cut on a proper grid; vehicles after 7-10 days.

Projects

Driveways & Walkways projects

View all projects

Driveways & Walkways: questions, answered

  • Driveways are poured 5-6 inches thick with steel rebar over compacted base, with control joints cut on a correct grid. That is the specification North Texas expansive soil needs; thinner slabs with wire mesh are where most driveway failures start.

  • Walk on it after 24-48 hours and drive on it after 7-10 days. Full cure strength takes 28 days.

  • Broom finish ($7-$11 per square foot) is the standard for driveways and walkways: clean, textured, and slip-resistant. Stamped borders or full stamped finishes ($12-$22 per square foot) add a decorative edge, and staining and sealing refresh existing slabs.

  • Yes. Tear-out and replacement is a large share of our concrete work in Dallas-Fort Worth — we demo the old slab, haul it off, re-compact the base, and pour new. Replacement is usually the right call when a slab has settled, heaved at the joints, or has widespread cracking, since overlays on a failed slab inherit its problems.

  • All concrete develops hairline cracks as it cures — the goal is controlling where. We cut control joints on a proper grid so movement happens at the joints instead of across the surface, use reinforcement suited to the slab's use, and pour at the right thickness over compacted base. Our 2-year workmanship warranty covers structural failures, and correctly installed slabs last 30+ years in DFW.

Areas served

Driveways & Walkways across Dallas–Fort Worth

Resources

Homeowner guides

All resources

Planning driveways & walkways?

Tell us about the space. We reply within one business day and walk the site with you before quoting.

Discuss Your Projector call (580) 665-2758